How to Flashing Samsung Galaxy S6 and S6 Edge

How to Flashing Samsung Galaxy S6 and S6 Edge - Home Android this time will share tutorials flashing Samsung Galaxy S6 and S6 Edge. Flash Samsung is usually performed by users if the System Smartphone already is not stable, to raise the OS version, Smartphone Samsung often occurs Error, Slow, Nor failure at start up as bootlop, If lit only samsung logo appears and can not enter the phone menu. Jia you are experiencing this kind, Here below is how to make Flash on Samsung Galaxy S6 and S6 Edge.

Preparing tools:

• Odin3 v3.10.6
• Driver USB Samsung
• Firmware Samsung GALAXY S6 SM-G920F
• Firmware Samsung Galaxy S6 Edge SM-G925F

How to Flash Samsung Galaxy S6 and S6 Edge:

1. Install Driver Samsung in Computers
2. Turn off the Samsung Galaxy S6 or Samsung Galaxy S6 Edge.
3. Next go to the Download mode by pressing the button Home + Volume Down + Power until enter into Download Mode to continue into Download Mode press the button Volume Up once. 
   
4. Run Odin3 v3.10.6 and Connect the Samsung Galaxy using the USB to a computer make sure the ID: COM in Samsung Galaxy S6 or S6 Edge is detected by Odin3 v3.10.6.
5. Incorporating Samsung Galaxy S6 firmware or Samsung Galaxy S6 Edge on tabs AP
6. If everything is prepared, then click START to begin the process Flashing Samsung Galaxy S6 or Samsung Galaxy S6 Flash Edge and wait for the process to complete.
   
     
7. If Flash is completed will appear PASS 
   
8. Done

This is how Flashing Samsung Galaxy S6 and S6 Edge Via Odin, hopefully a bit of this review can be useful and beneficial for you who are looking for ways Flash Samsung Galaxy S6.

How to Flashing Firmware Sony Xperia Z2 D6503

How to Flashing Firmware Sony Xperia Z2 D6503 - For those you users Xperia Z2 D6503 and happened to be looking for Firmware Xperia Z2 D6503. Home Android Share tutorial Flashing Firmware Sony Xperia Z2 D6503. Action, flashing usually done if your phone is damaged as bootloop due to damage files, one to install rom, failed root etc. So after the flashing process is complete, then you Handphone will be as before, when you first buy it.Oke get on with it following the tutorial.

Preparing tools:

• XPERIA Z2 Drivers
• Flashtool
• Firmware Sony Xperia Z2 D6503

How to Flashing Firmware Sony Xperia Z:

1. Extract the files flashtool that already you download and install
2. Then install the drivers open the C: /Flashtool/Drivers/flashtool-driver.exe
3. Checkbox all
4. And wait until the installation is complete
5. Extract the firmware which has been downloaded
6. Then copy the files .ftf to C: / Flashtool / Firmware
7. Then open the application Flashtool
8. Select a flash (lightning logo) 
   
9. Then select the flash mode
10. Select the firmware that already you copy earlier
11. Click Ok
12. When a pop-up turn off the Sony Xperia Z2 D6503 and connect the Sony Xperia Z2 D6503 to Pc / Laptop while you press and hold the volume down until exit the logo -Info-Start Flashing
13. Wait until the finish
14. Completed

How to Flashing Firmware Sony Xperia Z2 D6503 completed. Now wait until the Sony Xperia Z2 D6503, you Life.

How to Flashing samsung Grand Prime SM-G530H

How to Flashing samsung Grand Prime SM-G530H - At this opportunity, Home Android will share one tutorial for Galaxy grand prime this is the tutorial Flashing Samsung Galaxy Grand Prime SM-G530H. Tutorials flash is used to install android you who you are. many uses with do flash. one of which can be overcome bootloop Samsung Galaxy Grand Prime SM-G530H.Get on with it please follow the full tutorial flash Samsung Galaxy Grand Prime SM-G530H in the post below.

Preparing tools:

• Odin 3.09
• Samsung usb driver
• Firmware samsung Grand Prime SM-G530H

How to Flashing samsung Grand Prime:

1. First run the application Odin.
2. Then make samsung Grand Prime SM-G530H in the shoes of Downloading Mode in a way, Turn off your smartphone, press the volume DOWN + Home + Power. Continue by pressing Volume UP
   
3. And then connect the USB samsung Grand Prime SM-G530H to your PC / Laptop if your device is recognized it will exit this display in Odin, with blue color sign. 
   
4. If you are connected, click on "PDA" and locate the files, firmware that already you estrak. checklist section "auto-reboot" and "f. reset time".
5. If you are sure everything is correct, proceed by clicking the Start button, wait until flashing process is completed.
6. when the process is complete, it will say "PASS" in the green box and the phone will restart automatically
7. Finished.

How To Flashing Asus Zenfone 5

How To Flashing Asus Zenfone 5 - Home Android Will Share Tutorial Flashing Asus Zenfone 5. Bootloop on zenfone 5 can occur for several reasons, one of which is the android system work especial in phone Asus Zenfone 5 you. Hallmark traits zenfone 5 which bootloop is not able to enter on the menu (loading continues on the boot time) or at boot time image appears USB.

Solutions for bootloop is to Flashing, Here is how to Flashing Asus Zenfone 5:

Preparing tools:

• Intel USB Driver
• ADB Fastboot tool
• Download Firmware Zenfone 5 Make sure Type Firmware, you like WW, TW, CN or CHT, (see the cardboard back of your mobile phone is in near Barkot code so that no one download)
• Laptop / Computer

How To Flashing Asus Zenfone 5:

First Step :

1. Install USB drivers that have been downloaded earlier to completion
2. Extracts ADB fastboot tool
3. Rename firmware that you downloaded earlier, eg UL-ASUS_T00F-WW-1.14.40.50-user, changed into the "user" (for easy on-process cmd in the Step Three:)
4. Then save firmware inside the folder ADB fastboot tool 
   

Second step:

1. Turn off Handphone Asus Zenfone your.
2. Sign in to Mode "Zenfone Fastboot Mode" by pressing Power Button + Volume Up simultaneously
3. After there is a menu Zenfone Fastboot mode, Select the menu recovery
4. Wait until the image appears robot android that reads "nothing command"
5. Then press and hold the Button Volume Up + Button Volume Down simultaneously, Then release the Button Volume Up (hold the button down) to get into the mode "Android System Recovery"
6. After entering in mode Android system recovery select the menu "apply update from adb"
7. If already means you are ready to continue the next phase.

Step Three:

1. Connect the Handphone Asus Zenfone 5 your into Laptop / PC.
2. Open the folder ADB fastboot tool, and then click on file "Open" (next enter CMD)
3. Once entered into CMD, type a "adb devices" (without the quotes).
4. If you have successfully will display code number, serial Asus Zenfone 5 as the picture below.
   
    
5. If you already such, later with type "adb sideload user.zip" without quotes (user.zip is name the firmware that had been in change and already in the put in an ADB fastboot folder tools)
6. Wait process up to 100% and really finish (do not unplug the USB) 
   
7. If prosess already completed later your phone will memprosess installation firmware
8. And if the installation process, firmware is successful then you will enter back into android system recovery mode
9. After that select the menu "Reboot System Now"
10. Congratulations Asus Zenfone 5 you have no bootloop again and such new.

NB: If the reboot process zenfone 5 you remain, life Trying to do with the charger If you have entered into the stage of charging try you press button power until, zenfone 5 you, light up again.

How to Root Samsung Galaxy E5 Duos SM-E500H

How to Root Samsung Galaxy E5 Duos SM-E500H - Smart phones Samsung Galaxy E5 Duos SM-E500H already using the Android operating system v4.4.4 (KitKat). Samsung Galaxy E5 is powered by a processor powerful Quad-core has a speed of 1.2 GHz. Vendor Samsung uses 1.5 GB of RAM on the Samsung Galaxy E5, so that the performance of the kitchen runway Samsung Galaxy E5 can work optimally. 

Smartphone, Samsung Galaxy E5 has a camera, the primary resolution, quite large: 8 MP, the equivalent of 3264 x 2448 pixels and has been supported by the features autofocus camera is used to detect the focal point of the object about to be targeted and will only be focussed to a focal point, LED flash will help, the current lighting users Samsung Galaxy E5 was taking pictures in low light or at night,  Geo-tagging feature to determine the place and time when the image capture takes place, touch focus means that the user can set the Samsung Galaxy E5 fikus point to suit his own, Face Detection to detect faces so that later the images clearly visible face, That brief specifications of Samsung Galaxy E5 - E500M. How to Root Samsung Galaxy E5 follows below:

 Preparing tools:

•  Make sure the battery is at least 60% to do the tutorial this root.
• Samsung USB Driver
• CF-Auto-Root.tar dan Odin V3.0.7.exe 
•  Enable USB Debugging, do I go to the menu Settings> Developer Options> USB Debugging check.
• Download file Root

  How to Root Samsung Galaxy E5:

1. Turn off Handphone you. 
2. Entered into download mode, how to press and hold the Volume Down + Home + Power for 5-8 seconds.
3. In download mode later on you will see a warning triangle are yellow press button, Volume Up to continue.  
   
4.  Open the Odin application in PC (which was downloaded earlier along with root file).
5. Connect your device to PC.
6. If connected then will display a message ADDED in message box of Odin, if not check that drivers have been installed correctly or not. 
   
7.  After that click button PDA in Odin, then locate the file CF-Auto-Root.tar (which was downloaded earlier) 
   
8. Then click the Start button.  
   
9.  Wait until the process finishes running, less than about 30 to 1 minutes.
10. After the process is complete it will display a notification in Odin mark Green Box with the writing PASS. 
    
11.  After the reboot Handphone,you.
12. Unplug Samsung E5 your from a PC. 
13. After power up checks on the menu, whether it has been installed application SuperSU. If you already meant the rooting process successfully. 
    
14.  Check using the Root Checker application Samsung Galaxy E5 To ensure you've actually succeeded in the root.

How To Flash Asus Zenfone 2 via ADB sideload

How To Flash Asus Zenfone 2 via ADB sideload - Sometimes a flash is done on the phone when we can not live or can be called also bootloop. And this bootloop be in because because we were too over our android modify such work especial system in it and it is causing us fail to boot android / bootloop. Then the solutions to overcome them is by doing Flashing on Asus Zenfone 2. This time Home Android will share Tutorials Flashing Asus Zenfone 2. 

Preparing tools:

• Intel USB Driver for Android 
• ADB Fastboot tool 
• Asus Zenfone 2 Firmware (ZE551ML | ZE550ML | ZE500CL) 

 How To Flash Asus Zenfone 2: 

1. Turn off Zenfone 2 you. 
2. Sign in recovery mode.
3. Select the applying updates from ADB.
4. Connect to Asus Zenfone 2 to your PC / laptop via USB cable.
5. Open CMD on Windows (PC) (in the same folder where ADB is located). 
6. Check the connection with the device type adb if the connection is successful then the device will be detected. 
7. Type in adb sideload file.zip (file.zip = please adjust the name of the firmware file that you downloaded earlier).
8. Wait until the process is complete.

Congratulations Asus Zenfone 2 phone now you're back to factory settings or rather back to the original settings.   

How To Flashing Infinix Hot 2 X510

How To Flashing Infinix Hot 2 X510 - This time Home Android will share the firmware, and tutorial how to flashing Infinix hot2 Hot2 X510, Infinix is a new product in Indonesia but what if you Infinix phone suddenly experiencing bootloop or force close applications and other software problems, take it easy do not worry because by doing this Handphone you will return to normal as the initial buying, This method has been tried and successfully without any problems, firmware which I possess for this android version 5.1,  This method is also able to cope Handphone Infinix hot 2 hardbrick or the total dead, okay immediately see how below.

Preparing tools:

• MTK USB Driver
• Driver USB vcom 
• Flashtool Infinix
• Stock Rom | Stock Rom infinix hot 2 ROM android one | Stock Rom infinix hot ROM infinix

How to install the driver:

Search for files named installdriver.exe click two times the wait for it to finish, then install as well usb (Just click install 2 times) vcom, after the driver is installed plug the Handphone by pressing the button volume up or down until the notification appears right corner.

How To Flashing:

1. Extract the firmware and extract also Infinix flashtool
2. Make sure the battery is at least 50%, then Turn off Handphone
3. Run Infinix flashtool.exe (for win 7, right-click Run as administrator)
4. Click Browser and content from the scatter in the firmware folder downloaded earlier 
   
5. Click Start
6. Connect Handphone to PC / laptop in the situation Dead
7. Will the process of red-green-yellow ungu-, wait until it comes out green circle OK 
   
8. Try to turn on you Handphone, Wait for about 15 minutes
9. Done

NB: IF THERE IS A FAILURE OR LIABILITY IS NOT OUR PROBLEM