How to Flashing Samsung Galaxy S6 and S6 Edge

How to Flashing Samsung Galaxy S6 and S6 Edge - Home Android this time will share tutorials flashing Samsung Galaxy S6 and S6 Edge. Flash Samsung is usually performed by users if the System Smartphone already is not stable, to raise the OS version, Smartphone Samsung often occurs Error, Slow, Nor failure at start up as bootlop, If lit only samsung logo appears and can not enter the phone menu. Jia you are experiencing this kind, Here below is how to make Flash on Samsung Galaxy S6 and S6 Edge.

Preparing tools:

• Odin3 v3.10.6
• Driver USB Samsung
• Firmware Samsung GALAXY S6 SM-G920F
• Firmware Samsung Galaxy S6 Edge SM-G925F

How to Flash Samsung Galaxy S6 and S6 Edge:

1. Install Driver Samsung in Computers
2. Turn off the Samsung Galaxy S6 or Samsung Galaxy S6 Edge.
3. Next go to the Download mode by pressing the button Home + Volume Down + Power until enter into Download Mode to continue into Download Mode press the button Volume Up once. 
   
4. Run Odin3 v3.10.6 and Connect the Samsung Galaxy using the USB to a computer make sure the ID: COM in Samsung Galaxy S6 or S6 Edge is detected by Odin3 v3.10.6.
5. Incorporating Samsung Galaxy S6 firmware or Samsung Galaxy S6 Edge on tabs AP
6. If everything is prepared, then click START to begin the process Flashing Samsung Galaxy S6 or Samsung Galaxy S6 Flash Edge and wait for the process to complete.
   
     
7. If Flash is completed will appear PASS 
   
8. Done

This is how Flashing Samsung Galaxy S6 and S6 Edge Via Odin, hopefully a bit of this review can be useful and beneficial for you who are looking for ways Flash Samsung Galaxy S6.