How To Flash Repeat Advan Vandroid S5E Which bootloop / bricked

How To Flash Repeat Advan Vandroid S5E Which bootloop / bricked - is a way to overcome if you have any Advan Vandroid S5E bootloop or bricked. Bootloop itself is a condition of your Android smartphone can not turn on normally only able to enter the logo or always go into recovery mode. Just go ahead below is a tutorial how to flash Advan Vandroid S5E using the official firmware to address bootloop or brick. Follow the steps properly lest anyone miss that flashing process Vandroid S5E success.

Materials for Flash Vandroid S5E

• MediaTek SmartPhone Driver Auto Installer v1.1236.00 [Download]
• SP Flash Tool v3.31352.01 [Download]
• Advan Vandroid S5E Stock ROM Universal [Download]

How To Flash Repeat Advan Vandroid S5E

1. Download all the material above
2. Extract the driver MediaTek which already downloaded and then installed. advised to use Windows 7 to simplify the installation process.
3. Extract also SP Flash Tool and Stock ROM Vandroid S5E
4. Open the folder SP Flash Tool, Run as administrator flash_tool.exe
5. key press Scatter-loading
6. Search and select MT6572_Android_scatter.txt in the folder Stock ROM
7. Press Download
8. Connect the Vandroid S5E to a PC, using a USB cable
9. Make sure the driver is installed correctly when the smartphone connected to the PC
10. Process Flashing will run if the driver legible with, right and wait for it to finish.
11. If failed repeat from reading the driver usb and make sure it is is connected.
12. Finish, Congratulations now you already successfully overcome bootloop on android Hp advan Vandroid S5E.

Thus flashing ways advan Vandroid s5e of us hopefully this tutorial can be useful to you.